admin
Wärtsilä W50DF – Automation system
The DF engine concept by itself is based on fuel redundancy. In addition, WECS 8000 is totally distributed, in order to split up functionality an...
Wärtsilä W50DF – Properties & Conclusions
A large opening into the crankcase and camshaft to facilitate checking and maintenance. The three-piece connecting rod allows inspection of the b...
Wärtsilä W50DF – Maintenance schedule
Injection pump, Pilot fuel pump, Fuel feed pump, Injection valve, Gas system, Cylinder head, Cylinder liner, Main bearing, Crankshaft, Turboch...
Wärtsilä W50DF – Delivery tools
Maintenance tools for main bearings, maintenance tools for connecting rod, maintenance tools for piston, maintenance tools for cylinder liner, ma...
Wärtsilä W50DF – Evaluation of Engine Running Data
Measured running parameters: Engine speed, TC speed, Fuel rack position, Charge air pressure / temperature, Pressure difference over...
Wärtsilä W50DF – Installation dependent engine
The flywheel is connected to the crankshaft with fitting screws and special screws. The amount of fitting screws is dependent on the engine confi...
Wärtsilä W50DF – Instrumentation systems
Temperature sensors for Engine main systems: 01 Temperature sensors for zero main bearing TE700, 02 Temperature sensors for main bearing TE701…...
Wärtsilä W50DF – Control systems
Shut-down mechanism includes emergency stop devices: Emergency stop button (02), the stop lever (01), on the exterior side of the end cover. The ...
Wärtsilä W50DF – Intake & Exhaust systems
The intake and exhaust system channels delivers the compressed air to the combustion chamber and carries the exhaust gases out from the combustio...