admin
Wärtsilä W50DF – Starting air system
The engine is started by means of compressed air. Control air is needed for timing the operation of pneumatically operated starting valves and f...
WÄRTSILÄ W50DF – Cooling water system
Treated cooling water is used for cooling the cylinder liners, cylinder heads, exhaust valve seats, charge air and lubricating oil. The cooling w...
WÄRTSILÄ W50DF – Lubricating oil system
The arrangement on the engine consist of lubricating system at free end, storage system, delivery system, lubricating oil control devices and o...
WÄRTSILÄ W50DF – fuel system, part 3
As fuel enters the assembly, it moves past the internal check valve then through the turbine centrifuge where it flows in a spiralling direction...
WÄRTSILÄ W50DF – fuel system, part 2
The low pressure fuel oil system on the engine consists of the fuel delivery piping and leak fuel system. The aim of the low pressure system is ...
WÄRTSILÄ W50DF – fuel system, part 1
All valve actuation forces are generated magnetically through an E-core solenoid device. Magnetic flux generated in the E-core solenoid assembly ...
WÄRTSILÄ W50DF – engine main components
The engine block is made of cast iron in one piece. The block has been given a stiff and durable design to absorb internal forces. It works as a...
Wärtsilä 50DF – Транспортировка: размеры и вес
Подъем рядных двигателей с жестким креплением. Подъем V-образных двигателей с ж...
Wärtsilä 50DF – Конструкция машинного отделения
Необходимое рабочее пространство вокруг двигателя определяется, в основном, р...