Treated cooling water is used for cooling the cylinder liners, cylinder heads, exhaust valve seats, charge air and lubricating oil. The cooling w...
The arrangement on the engine consist of lubricating system at free end, storage system, delivery system, lubricating oil control devices and o...
As fuel enters the assembly, it moves past the internal check valve then through the turbine centrifuge where it flows in a spiralling direction...
The low pressure fuel oil system on the engine consists of the fuel delivery piping and leak fuel system. The aim of the low pressure system is ...
All valve actuation forces are generated magnetically through an E-core solenoid device. Magnetic flux generated in the E-core solenoid assembly ...
The engine block is made of cast iron in one piece. The block has been given a stiff and durable design to absorb internal forces. It works as a...
Подъем рядных двигателей с жестким креплением. Подъем V-образных двигателей с ж...
Необходимое рабочее пространство вокруг двигателя определяется, в основном, р...
Передача мощности в пропульсивных установках производится с помощью упругой м...
